NETGEAR DM200 User Manual page 39

Broadband High-Speed DSL Modem Model DM200
Note If your ISP supports two virtual interfaces (one Internet virtual interface and one IPTV
virtual interface), either you can connect a computer or router to the modem or you
can connect an IPTV device to the modem. Because the modem provides a single
LAN port, you can connect only one type of device and you cannot use both virtual
interfaces simultaneously.
To view or specify the settings for a VDSL Internet connection that does not require a login:
1. Launch a web browser from a computer that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select Internet.
The Internet Setup page displays.
5. From the Select Country menu, select the country in which you use the modem.
The Select Country menu is not available in all countries and might be masked out.
6. From the Select Internet Service Provider menu, select the Internet service provider (ISP) that you
are using.
If your ISP is not in the menu, select Other.
7. From the Transfer Mode menu, select VDSL(PTM).
When you select VDSL(PTM) from the Transfer Mode menu, the only option in the DSL Mode menu
is VDSL2.
8. From the menu above the Enable This Interface check box, select the virtual interface that you are
configuring.
• Internet. If you connect the modem to a computer or router, select the Internet virtual interface. In
most situations you can ignore the IPTV virtual interface.
• IPTV. For some ISPs, you can configure the IPTV virtual interface. However, if you configure the
modem with an IPTV virtual interface, you can connect only an IPTV device to the modem and you
cannot connect a computer or router to the modem.
9. Make sure that the Enable This Interface check box is selected for the interface that you are configuring.
Clear the Enable This Interface check box only if you want to configure the virtual interface but not
enable it.
10. Scroll down to the Does your Internet connection require a login? section and select the No radio button.
Manage the Internet Settings Manually
39