Change The Traffic Statistics Polling Frequency - NETGEAR DM200 User Manual

Broadband High-Speed DSL Modem Model DM200
(Continued)
Field or Column
Up Time
DSL Link
The pop-up window displays the downstream and upstream DSL link information that is described in this table.
Connection Speed
Line Attenuation
Noise Margin
Poll Interval

Change the Traffic Statistics Polling Frequency

You can change the polling frequency or stop traffic polling.
To change the traffic statistics polling frequency or stop polling:
1. Launch a web browser from a computer that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > ADVANCED Home.
The ADVANCED Home page displays.
5. In the Internet Port pane, click the Show Statistics button.
A pop-up window displays.
6. Change the polling frequency or stop polling:
• To change the polling frequency, do the following:
a. In the Poll Interval field, enter a time in seconds.
b. Click the Set Interval button.
• To stop polling, click the Stop button.
Description
The time elapsed since this port acquired the link.
The downstream and upstream connection speed rates in Mbps.
The downstream and upstream line attenuation (LATN) in dB. The LATN expresses the
signal quality.
The downstream and upstream signal-to-noise ratio margin (SNRM) in dB. The SNRM
expresses the signal quality in relation to interference.
The interval at which the statistics are updated on this page.
Manage the Modem and Monitor the Traffic
82