NETGEAR DM200 User Manual page 16

Broadband High-Speed DSL Modem Model DM200
If your ISP is not in the menu, select Other.
12. Select the Yes radio button.
13. Click the Next button.
14. During the detection and setup process, you must change the password for the modem and enable
password recovery by selecting two questions and providing answers.
If the Admin Accounting Settings page does not yet display, other pages might display and you might
need to provide more information, in which case you must continue with
depend on your type of ISP connection and configuration.
To change the password and enable password recovery, do the following:
a. In the New Password field, enter a new password.
The ideal password contains no dictionary words from any language and contains uppercase and
lowercase letters, numbers, and symbols. It can be up to 30 characters.
b. In the Confirm New Password field, repeat the password.
We recommend that you write down your new password or save it in some other way so you don't
forget it.
c. From the Security Question #1 menu, select a question.
d. In the first Answer field, enter an answer that makes sense to you.
e. From the Security Question #2 menu, select a question that is different from the first one that you
selected.
f. In the second Answer field, enter an answer that makes sense to you.
g. Click the Next button.
Install and Access the Modem
16
Step 16. The pages that display