Use Auto Config For An Ipv6 Internet Connection - NETGEAR DM200 User Manual

Broadband High-Speed DSL Modem Model DM200
If you do not specify an ID here, the modem generates one automatically from its MAC address.
9. Click the Apply button.
Your settings are saved.

Use Auto Config for an IPv6 Internet Connection

To set up an IPv6 Internet connection through autoconfiguration:
1. Launch a web browser from a computer that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The Basic Settings page displays.
5. From the Internet Connection Type menu, select Auto Config.
The modem automatically detects the information in the following fields:
• Router's IPv6 Address on WAN.This field shows the IPv6 address that is acquired for the modem's
WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which is also
Manage the Internet Settings Manually
51