Change The Language; Let The Modem Automatically Update Its Firmware - NETGEAR DM200 User Manual

The user name is admin. The default password is password. The user name and password are
case-sensitive.
4. Click the OK button.
The BASIC Home page displays a dashboard that lets you see the status of your Internet connection
and network at a glance. You can click any of the sections of the dashboard to view more detailed
information. The left column displays the menus, and at the top is an ADVANCED tab that you can use
to access more menus and pages.

Change the Language

By default, the language is set as Auto. You can change the language.
To change the language:
1. Launch a web browser from a computer that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. In the upper right corner, select a language from the menu.
5. When prompted, click the OK button to confirm this change.
The page refreshes with the language that you selected.

Let the Modem Automatically Update Its Firmware

When you set up your modem and are connected to the Internet, the modem automatically checks for you
to see if newer firmware is available. If it is, a message is displayed at the top of the page. For information
about manually updating firmware, see
Broadband High-Speed DSL Modem Model DM200
Update the Firmware of the Modem
Install and Access the Modem
21
on page 71.