NETGEAR DM200 User Manual page 44

Broadband High-Speed DSL Modem Model DM200
The following figure shows the settings that display when you configure a VDSL connection with a login
and PPPoE service.
11. Enter the VDSL settings as described in the following table.
Field
Multiplexing Method
VPI
VCI
Use VLANID
Description
These settings are disabled because they do not apply to a VDSL connection.
Select the Use VLANID check box and enter the VLAN ID, as indicated by your ISP.
A VLAN ID might be required if you subscribe to both Internet service and a service such
as IPTV. If your ISP did not provide you with a VLAN ID, leave the Use VLANID check
box cleared, which is the default setting.
Manage the Internet Settings Manually
44