(15) Adjustment of hook oil amount
(16) Shuttle connection / disconnection and oil wick piping
1. Loosen the 5 setscrews
2. Remove the setscrew
3. Pull Part B upwards of the two lubrication pipes
4. Loosen 2 setscrews
.
5. Loosen the setscrew
6. Loosen the setscrew
7. Remove the setscrew
8. Pull the shuttle
Top surface
of the bed
B
A
Standard Adjustment
Procedures of disassembling
.
and pull the oil tank
of the clamp
in the waste oil pipe
and take out the driver
.
and pull out the shuttle race adjust shaft
in the direction of the arrow C and take it out.
C
in the direction of the arrow A.
and
. Take them out of the oil tank
, and remove the clamp
.
.
Rear side of
the bed
– 26 –
.
and the setscrew