Table of Contents
Advertisement
(35) Initial length of the presser cylinder
When the shaft section of the presser cylinder
distance is 119.5 ± 0.3mm between the ø5 hole
knuckle.
(36) Initial length of the 2-step stroke cylinder
Adjust the center-to-center distance to 111.5 ± 0.3mm between the 2-step stroke fulcrum shaft
connecting shaft
stroke cylinder)
assumes a state of maximum stroke.
Standard Adjustment
119.5
Standard Adjustment
of the intermediate stop cylinder knuckle when the intermediate stop cylinder (2-step
±
111.5
0.3 (at the maximum stroke)
assumes a state of maximum suction, the center-to-center
of the presser cylinder
±
0.3mm
– 54 –
and the ø5 hole
of the cylinder
Cylinder rod
Feed bracket
and the
Advertisement
Table of Contents
