Specifications - JUKI AMS-221EHL Manual

1. Specifications

No.
Model name
Item
Sub-class
1 Sewing area
2 Max. sewing speed
3 Stitch length
4 Feed motion of feeding frame
5 Needle bar stroke
6 Needle
7 Method to lift feeding frame
8 Feeding frame shape
9 Lift of feeding frame
10 Intermediate presser stroke
11 Lift of intermediate presser
Intermediate presser
12
DOWN position variable
13 Needle thread clamp device
14 Needle thread tension
15 Hook
16 Lubrication
17 Lubricating oil
18 Grease
19 Memory of pattern data
20 Temporary stop facility
21 Enlarging/Reducing
function
22 Enlarging/Reducing method
23 Sewing speed limitations
24 Pattern selector facility
25 No. of sheets counter
Sewing counter
26
(Bobbin thread counter)
27 Memory back-up
28 2nd origin setting facility
29 Sewing machine motor
30 External dimensions
31 Weight (gross weight)
32 Power consumption
33 Working temperature/humidity
34 Supply voltage/frequency
35 Air pressure used
36 Air consumption
Needle highest position
37
stop facility
(Caution) Grease type, refer to (3) Application of grease and Locktight
AMS-221EHS AMS-221EHL
2516
X-Direction (right, left) 250mm;
Y-Direction (forward, backward) 160mm
2700rpm (when sewing pitch is 3mm or less)
0.1 to 12.7mm (Min. resolution : 0.05mm)
intermittent feed (2-shaft drive by stepping motor)
H type: DP x 17 # 18
Right and left united Right and left separated
Standard 0 to 3.5mm (Max. 0 to 7.0mm)
H type
Active tension (electronic thread tension control mechanism)
Plane part: grease, hook part: minute volume lubrication (tank type)
JUKI NEW Defrix oil (equivalent to ISO VG32) (Lubrication system)
1. Penetration No. 2 lithium grease, 2. Templex N2, 3. Juki Grease A, 4. Juki Grease B (Caution)1.
EEP-ROM, Media
• EEP-ROM : Max. 200 patterns (Max. 20,000 stitches/1pattern)
• Media : Max. 999 patterns (Max. 50,000 stitches/1pattern)
Used to stop machine operation during a stitching cycle.
Allows a pattern to be enlarged or reduced on the X axis Y axis independently when sewing a pattern.
Pattern enlargement / reduction can be done by increasing / decreasing either
stitch length or the number of stitches.
(When the pattern button is selected, the function available is only the adjustment of stitch length.)
200 to 2,700 rpm (Scale : 100 rpm steps)
(EEP-ROM : 1 to 200, Media : 1 to 999)
In case of a power interruption, the pattern being used will automatically be stored in memory.
Using jog keys, a 2nd origin (needle position after asewing cycle) can be set in the
desired position within the sewing area.
The set 2nd origin is also stored in memory.
W: 1,200mm L: 1,000mm H: 1,200mm
(Excluding thread stand)
197kg
Temperature: 5°C to 35°C, Humidity: 35 to 85% (no condensation)
Standard: 0.5 to 0.55MPa, Max. 0.55MPa
After the completion if sewing, the needle can be brought up to its highest position.
– 1 –
Application
AMS-221ESL
41.2mm
S type: DP x 5 # 14
Air
Standard 25mm, Max. 30mm
Standard 4mm (0 to 10mm)
20mm
S type
2-fold semi-rotary hook
1% to 400% times (0.1% steps)
Pattern No. selection method
Up/Down method (0 to 9,999)
Up/Down method (0 to 9,999)
Small-sized servomotor
700VA
Rated voltage ±10% , 50 / 60Hz
3
1.8dm /min (ANR)
AMS-221EHS
3020
X-Direction (right, left) 300mm;
Y-Direction (forward, backward) 200mm
H type: DP x 17 # 18
Right and left united
H type
W: 1,200mm L: 1,100mm H: 1,200mm
(Excluding thread stand)
204kg
Standard: 0.35 to 0.4MPa, Max. 0.4MPa