Connecting Console Cable; Console Cable - H3C S5100-SI series Quick Start Manual

Quick Start
H3C S5100-SI/EI Series Ethernet Switches
(2) (2) (2) (2)
(4) (4) (4) (4)
(6) (6) (6) (6)
(1) AC/DC power cabinet
(4) RTN strip
(7) Grounding to the earth
(10) Ethernet switch
Figure 3-28 Ground the switch through the PGND of the powe
cabinet

3.6 Connecting Console Cable

3.6.1 Console Cable

Console cable is an 8-core shielded cable. At one end of the
cable is a crimped RJ45 connector to be connected to the Console
port of the switch; at the other end of the cable is a DB-9 (female)
connector to be connected to the 9-core (pin) serial port on the
Console terminal. See Figure 3-29.
(1) (1)
(3) (3) (3) (3)
( 5 ) ( 5 ) ( 5 ) ( 5 )
(7) (7)
(2) –48V strip
(5) RTN
(8) Grounding wire
(11) DC power input
3-32
Chapter 3 Installing the Switch
(11) (11)
( 10 ) ( 10 ) ( 10 ) ( 10 )
( 8 ) ( 8 ) ( 8 ) ( 8 ) ( 8 ) ( 8 )
(3) –48V
(6) PGND strip
(9) Screw
( 9 ) ( 9 ) ( 9 ) ( 9 ) ( 9 ) ( 9 )
r