Chapter 3 Installing The Switch - H3C S5100-SI series Quick Start Manual

Quick Start
H3C S5100-SI/EI Series Ethernet Switches

Chapter 3 Installing the Switch

Caution:
When you ask your sales agent to maintain the switch, you must
ensure that the dismantlement-preventive seal on a mounting screw of
the switch chassis is intact. If you want to open the chassis, you
should contact the agent for permission. Otherwise, you will bear any
consequence resulted from your actions without permission.
3.1 Rack-Mounting the Switch
You can mount an H3C S5100 switch into a 19-inch standard
rack in one of the following four ways:
Use front mounting ears
Use front mounting ears and rear mounting ears
Use front mounting ears and a tray
Use front mounting ears and guide rails
The installation methods of a switch depend on the depth and
width of the switch. For the specific installation methods, see Table 3-1
and Table 3-2.
Chapter 3 Installing the Switch
3-1