H3C S5100-SI series Quick Start Manual page 24

Quick Start
H3C S5100-SI/EI Series Ethernet Switches
XFP modules
XENPAK optical modules
Note:
You are recommended to use H3C's optical modules for the
S5100-SI/EI series Ethernet switches.
Only the S5100-26C-EI, S5100-50C-EI, S5100-26C-PWR-EI, and
S5100-50C-PWR-EI switches support XENPAK and XFP optical
modules, but these switches do not support the XFP modules that
require -5.2 V power supply.
BIDI modules must be used in pair. For example, if an
SFP-GE-LX-SM1310-BIDI is used at one end, an
SFP-GE-LX-SM1490-BIDI module must be used at the other end.
100 M BIDI modules must also be used in pair.
For detailed SFP module specifications, see H3C Low-End Series
Ethernet Switches Pluggable Module Manual.
Item
Chapter 1 Product Overview
XFP-SX-MM850
XFP-LX-SM1310
XFP-LH40-SM1550-F1
XENPAK-SX-MM850
XENPAK-LX-SM1310
XENPAK-LH40-SM1550
1-17
Model