Table of Contents
Advertisement
5500A
Getting Started
The 5500A Calibrator is a fully programmable precision source of the following:
•
•
•
•
•
•
•
•
Features of the 5500A Calibrator include the following:
•
•
•
•
•
•
•
•
•
•
•
Instruction Manuals
The 5500A Manual Set provides complete information for operators and service or
maintenance technicians. The set includes:
•
•
•
•
•
2
DC voltage from 0 V to +1020 V.
AC voltage from 1 mV to 1020 V, with output from 10 Hz to 500 kHz.
AC current from 0.01 µA to 11.0 A, with output from 10 Hz to 10 kHz.
DC current from 0 to +11.0 A.
Resistance values from a short circuit to 330 MΩ.
Capacitance values from 330 pF to 1100 µF.
Simulated output for three types of Resistance Temperature Detectors (RTDs).
Simulated output for nine types of thermocouples.
Automatic meter error calculation.
X and D keys that change the output value to pre-determined cardinal values
for various functions.
Programmable entry limits that prevent invalid amounts from being entered.
Simultaneous output of voltage and current, up to 11 kW.
Simultaneous output of two voltages.
Extended bandwidth mode outputs multiple waveforms down to 0.01 Hz, and sine
waves to 2 MHz.
Variable phase signal output.
Standard IEEE-488 (GPIB) interface, complying with ANSI/IEEE Standards
488.1-1987 and 488.2-1987.
EIA Standard RS-232-C serial data interface for printing, displaying, or transferring
internally stored calibration constants, and for remote control of the 5500A.
Pass-through RS-232-C serial data interface for communicating with the Unit Under
Test (UUT).
Extensive automatic internal self testing and diagnostics of analog and digital
functions.
5500A Getting Started Manual (PN 945159)
5500A Operator Reference Guide (PN 945097)
5500A Remote Programming Reference Guide (PN 105783)
5500A Operator Manual (Provided on CD-ROM or printed copy available for
purchase (PN 1628802) through the Fluke Service Department.)
5500A Service Manual (PN 105798)
Advertisement
Table of Contents
