Avaya H.323 9608 Installing And Maintaining page 33

11. While the upgrade script file is being downloaded, all IP deskphones display the
12. When the deskphone established the validity of the application file received, the
13. While the application file is saved in flash memory, all IP deskphones display the
14. The deskphone contacts the Avaya Media Server and displays one of the following
Steps to be performed by user after deskphone displays login and extension
prompts:
1. Enter a new extension and press OK. To register the deskphone without the
Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G
Note:
The SIG parameter value determines the signaling protocol whether H.323 or
SIP, and is used to determine the proper upgrade file that is downloaded. If you
set the SIG parameter manually using the local administrative Craft SIG
procedure, that value takes precedence over a SIG setting in a configuration file.
A change in the SIG value may require a reset to the deskphone so that a new
or different upgrade file can be downloaded to the deskphone.
following message:
HTTP: n sc etag
where n is the number of the IP address obtained from the HTTP server, sc is the
status code of the HTTP response, and etag is the value of the ETag header.
deskphone displays the following message:
wait...... s secs
where s is the number of seconds that elapse while non-volatile memory is
erased.
following message:
Saving to flash 1% 1 secs
where the percentage of the file and the number of elapsed seconds increase as
the application file is stored in flash memory.
prompts for an extension:
.
press Enter or OK
extension or password (unnamed), press only OK or make no entry and wait 60
seconds.
Note:
Unnamed registration is registering a deskphone with the call server without entry
of an extension or password. You must set the UNNAMEDSTAT parameter to
enable unnamed registration. Deskphones that are registered unnamed have
limited functionality. For more information, see
page 34.
All IP deskphones display one of the following messages:
Login
Enter Password
Understanding the plug in and reset process
File Obtained; please
,
Login Enter Extension
, or
Enter Extension and
About unnamed registration
August 2013
on
33