Table of Contents
Advertisement
[WIRING PRECAUTIONS]
Fix terminal screws securely with the specified torque.
Loose terminal screws may cause short circuit or malfunction.
If the terminal screws are too tight, it may cause falling, short circuit or
erroneous operation due to damage of the screws or module.
Make sure foreign objects do not get inside the module, such as dirt and
wire chips.
It may cause fire, trouble or malfunction.
Be sure to fix the communication and power cables that are connected to
the module in place, either by running them through a duct or by using
clamps.
If the cables are not fixed in one of these ways, dispersion, movement, or
careless pulling of the cables may cause damage to the module or cables,
or malfunction due to cable contact faults.
When removing the communication cable or power supply cable from the
module, do not pull the cable. When removing the cable with a connector,
hold the connector on the side that is connected to the module.
When removing the cable connected to the terminal block, first loosen the
screws on the part that is connected to the terminal block.
Pulling the cable that is still connected to the module may cause
malfunction or damage to the module or cable.
[STARTUP AND MAINTENANCE PRECAUTIONS]
Do not touch terminals when the power is on.
It may cause an electric shock or malfunction.
Perform cleaning the module or re-tightening of terminal screws after
making sure to turn off the external power supply. If you do not switch off
the external power supply, it will cause trouble or malfunction of the
module.
Never try to disassemble or modify module.
It may cause trouble, malfunction, injury or fire.
The module case is made of resin; do not drop it or subject it to strong
shock. Module damage may result.
Make sure to switch all phases of the external power supply off before
installing or removing the module to/from the panel.
If you do not switch off the external power supply, it will cause trouble or
malfunction of the module.
[DISPOSAL PRECAUTIONS]
When disposing of this product, treat it as industrial waste.
CAUTION
DANGER
CAUTION
CAUTION
A - 2
Advertisement
Table of Contents
