Table of Contents
Advertisement
4.3 Names and settings of parts
The names of parts of the AJ65SBT-RPS/RPG module, indication statuses of
LEDs, and settings of switches are described below.
DA
DG
DB
SLD
4)
No.
Name
1)
Power LED
1)
+24V
24G
(FG)
Check for the module condition by observing the state of lighting of the LED.
LED
Name
For hardware test
Goes on: At power-on.
PW
Goes off: At power-off.
Goes on: Hardware test is under operation.
TEST
Goes off: Communication is under operation.
Goes on: Hardware is faulty.
Switch set value is
faulty.
ERR.
Flashes: Switch set value was
changed during
operation.
Goes off: Normal
Flashes: Circuit is normal.
Goes off: Circuit is faulty.
SD1
Flashes: CC-Link side circuit is
normal.
RD1
Goes off: Optical communication
side circuit is faulty.
Flashes: Circuit is normal.
Goes off: Circuit is faulty.
SD2
Flashes: CC-Link side circuit is
normal.
Goes off: Optical communication
RD2
side circuit is faulty.
OUT
6)
Application
Application
Goes on: Communication is faulty.
Flashes: Switch set value was
Goes off: Communication is
Goes on: Data is being transmitted
Goes off: Data is not transmitted to
Goes on: Data is being received
Goes off: Data is not received from
Goes on: Data is being transmitted to
Goes off: Data is not transmitted to
Goes on: Data is being received
Goes off: Data is not received from
17
3) 2)
B RATE
TEST
4
2
1
ON
I N
5)
For normal operation
Switch set value is faulty.
changed during
operation.
normal.
to CC-Link side.
CC-Link side.
from CC-Link side.
CC-Link side.
optical communication side.
optical communication side.
from optical
communication side.
optical communication
side.
Advertisement
Table of Contents
