Life Fitness Elevation 95X-ALLXX-01 How To Do page 9

Hide thumbs Also See for Elevation 95X-ALLXX-01:

HOW TO... REPLACE THE USER ARM HEART RATE HAND SENSORS

Tools required: Phillips screwdriver

Estimated time required: 20 minutes

1. If the cross-trainer has

line cords, unplug them

from the wall outlets.

2. Remove the three screws

that secure the inner

and outer hand sensors

to each other.

3. Note the location of the

wires on the hand

sensors. This will

simplify reassembly.

4. Disconnect the wires.

5. Connect the wires to the

new hand sensors.

6. Install the new hand

sensors using the screws

removed and saved in

Step 3.

7. Test the new hand

sensors for proper

operation.

Heart Rate Hand

Senor (front)

Heart Rate Hand

Senor (rear)

Phillips

Screws (3)

Elevation 95X-ALLXX-01 Commercial Cross-trainer

"How To..."