Life Fitness Elevation 95X-ALLXX-01 How To Do page 13

Hide thumbs Also See for Elevation 95X-ALLXX-01:

HOW TO... REPLACE THE RIGHT BULLHORN BUTTON ASSEMBLY

Tools required: Phillips screwdriver

Estimated time required: 20 minutes

1. If the cross-trainer has line cords, unplug

them from the wall outlets.

2. Remove the bullhorn heart rate hand

sensors. (See the "How To..." on page 38.)

3. Remove and save the Phillips screw that

secures the button assembly to the

bullhorn.

4. Disconnect the small ribbon cable that

connects the button assembly through the

bullhorn.

5. Install the new button assembly using the

screw removed and saved in step 4.

Elevation 95X-ALLXX-01 Commercial Cross-trainer

Screw

(beneath

sensor)

"How To..."

Button

Assembly

Right

Bullhorn

disconnect

ribbon

cable here