Advertisement
Elevation 95X-ALLXX-01 Commercial Cross-trainer
"How To..."
HOW TO... REPLACE THE INNER CRANK COVER
Tools required: Phillips screwdriver, 4mm Allen wrench, 13mm socket wrench
Estimated time required: 30 minutes
1. If the cross-trainer has line
cords, unplug them from the
wall outlets.
2. Remove the rocking link
assembly. (See the "How To..."
on page 48.)
3. Swing the rocker assembly
backward to allow access to the
inner crank cover mounting
screws.
4. Remove and save the two Allen
screws that secure the inner
crank cover to the inner crank.
5.
Install new inner crank cover in
reverse order using the
hardware removed and saved in
the previous steps.
58
position the rocking link
behind the rear stabilizer
Inner Crank Cover
Mounting Screws
the mounting screws are
now accessible from the
inside of the crank cover
Advertisement
