Advertisement
HOW TO... REPLACE THE TOP REAR TOWER COVER
Tools required: Phillips screwdriver, 13mm socket wrench
Estimated time required: 30 minutes
1. If the cross-trainer has line cords, unplug
them from the wall outlets.
2. Remove and save the Phillips screw that
secures the right rocking link cover to the
rocking link. Save the rocking link cover.
3. Remove and save the bolt, washer, and
spacer that secure the front of the right
rocking link to the frame.
4. Remove and save the Phillips screw that
secures the left rocking link cover to the
rocking link. Save the rocking link cover.
5. Remove and save the bolt, washer, and
spacer that secure the front of the left
rocking link to the frame.
6. Remove and save the ten Phillips screws
that secure the top rear tower cover to
the frame and tower. The rocker
assemblies must be swung backward
slightly to allow access to some of the
mounting screws.
7. Install the new top rear tower cover in
reverse order using the hardware
removed and saved in the previous steps.
Elevation 95X-ALLXX-01 Commercial Cross-trainer
Rocking
Link Cover
Rocking Link
Phillips
Screw
Washer
Bolt
Phillips Screw
(one of five
on each side)
"How To..."
Top Rear
Tower Cover
49
Advertisement
