Advertisement
Elevation 95X-ALLXX-01 Commercial Cross-trainer
"How To..."
HOW TO... REPLACE HANDLEBARS
Tools required: Phillips screwdriver, 5mm Allen wrench
Estimated time required: 30 minutes
1. If the cross-trainer has line cords,
unplug them from the wall outlets.
2. Remove the deadshaft end cap covers
(See the "How To..." on page 32.)
3. Remove and save the three Allen bolts
and washers that secure the handlebar
to the rocker arm.
4. Disconnect the heart rate cable
connector.
5. Install the new handlebar in reverse
order using the bolts removed and
saved in step 4.
6. Test the new handlebar for correct
heart rate operation.
40
Bolts (3)
Right
Handlebar
Rocker Arm
Washers (3)
Advertisement
