Life Fitness Elevation 95X-ALLXX-01 How To Do page 19

Hide thumbs Also See for Elevation 95X-ALLXX-01:

HOW TO... REPLACE THE DEADSHAFT

Tools required: Phillips screwdriver, 5mm and 6mm Allen wrench, 13mm and 17mm socket wrenches, snap ring tool

Estimated time required: 45 minutes

1. If the cross-trainer has line cords,

unplug them from the wall

outlets.

2. Remove the deadshaft end cap

covers. (See the "How To..." on

page 32.)

3. Remove the media tray. (See the

"How To..." on page 31.)

4. Remove the console back cover.

(See the "How To..." on page 29.)

5. Remove the top deadshaft cover.

(See the "How To..." on page 33.)

6. Remove both handlebars. (See

the "How To..." on page 40.)

7. Remove both rocker arms. (See

the "How To..." on page 43.)

8. Remove and save the washers and

shaft collars on both sides of the

deadshaft.

9. Remove and save the bolts and

washers that secure the

deadshaft to the monocolumn.

10. Install the new deadshaft in

reverse order using hardware

removed and saved in steps 9 and

10.

Elevation 95X-ALLXX-01 Commercial Cross-trainer

Collar

Needle

Bearing

Snap

Ring

Washers

Deadshaft

Rocker Arm

Deadshaft

"How To..."

Bolts (2)

Washers (2)