Advertisement
Elevation 95X-ALLXX-01 Commercial Cross-trainer
"How To..."
HOW TO... REPLACE THE SIX-VOLT BATTERY
Tools required: Phillips screwdriver
Estimated time required: 30 minutes
1. If the cross-trainer has line
cords, unplug them from the
wall outlets.
2. Remove the rear tower rear
cover. (See the "How To..." on
page 50.)
3. Disconnect the red and black
wires from the battery
terminals.
4. Remove and save the two
Phillips screws that secure the
battery to the tower.
5.
Install the new six-volt battery
in reverse order using the
hardware removed and saved in
the previous steps.
60
Negative Terminal
(black wire)
Rear Tower
Positive Terminal
(red wire)
Battery
Phillips
Screws (2)
Advertisement
