Life Fitness Elevation 95X-ALLXX-01 How To Do page 7

Hide thumbs Also See for Elevation 95X-ALLXX-01:

HOW TO... REPLACE THE TOP DEADSHAFT COVER

Tools required: Phillips screwdriver

Estimated time required: 30 minutes

1. If the cross-trainer has line cords, unplug them

from the wall outlets.

2. Remove the console back cover. (See the "How

To..." on page 29).

3. Remove and save the media tray.

4. Remove the right and left deadshaft end cap

covers. (See the "How To... on page 32.)

5. Raise the console slightly to allow access to the

two upper mounting screws that secure the top

deadshaft cover to the unit.

Be careful not to allow the console to fall while raising it.

6. Remove the five screws that secure the top deadshaft cover to the unit.

7. Install the new top deadshaft cover in reverse order using hardware removed and saved

in steps 4, 7, and 8.

Elevation 95X-ALLXX-01 Commercial Cross-trainer

Console Console (raised)

Console Support Bracket

Top Dead

Shaft Cover

"How To..."

Phillips

Screws (2)

Phillips

Screws (3)