Outline Of Control; Thermostat Sensor In Remote Controller (Only For Z-Control) - Daikin ERQ Service Manual

Outline of Control

6. Outline of Control

6.1 Thermostat Sensor in Remote Controller (only for Z-
control)
Temperature is controlled by both the thermostat sensor in remote controller and air suction
thermostat in the AHU. (This is however limited to when the field setting for the thermostat
sensor in remote controller is set to "Use.")
Cooling
If there is a significant difference in the preset temperature and the suction temperature, fine
adjustment control is carried out using a body thermostat sensor, or using the sensor in the
remote controller near the position of the user when the suction temperature is near the preset
temperature.
Assuming the preset temperature in the figure above is 24°C, and the suction
temperature has changed from 18°C to 30°C (A → F):
Body thermostat sensor is used for temperatures from 18°C to 23°C (A → C).
Remote controller thermostat sensor is used for temperatures from 23°C to 27°C (C → E).
Body thermostat sensor is used for temperatures from 27°C to 30°C (E → F).
And, assuming suction temperature has changed from 30°C to 18°C (F → A):
Body thermostat sensor is used for temperatures from 30°C to 25°C (F → D).
Remote controller thermostat sensor is used for temperatures from 25°C to 21°C (D → B).
Body thermostat sensor is used for temperatures from 21°C to 18°C (B → A).
38
Ex: When cooling
: http://splitoff.ru/tehn-doc.html
ESIE09-05
Function