Expansion Ksu Pcbs; Pcb Hardware/Software Options - Toshiba Strata DK40 Installation & Maintenance Manual

DK40 Installation
Table 2-3 DK40 Base KSU PCBs
PCB
Four loop start exchange line
TCOU
circuits
or...
Two ISDN BRI circuits (4 channels
TBSU
NT or TE)
KSTU3 Four standard telephone circuits
Recognises DTMF tones generated
by a standard telephone and is
K5RCU required for DISA, tie and DDI lines
and the DK40 built-in Auto
Attendant.
KKYS Automated Attendant
RKYS2 Automated Attendant & ACD
RKYS3 Automated Attendant, ACD & SMIS
Toshiba recommends installing the Base KSU option PCBs K5RCU and/or KSTU3 before
mounting the Base KSU on the wall. Install the Expansion KSU per
Expansion KSU option PCBs.
The Base KSU slots 00~14 are automatically assigned the following codes in Program 03
when the system is turned on and the Base KSU PCBs are installed.
Slot 00: Code 91 without K5RCU3; Code 98 with K5RCU
Slot 11: Code 61 for eight digital telephones, Code 62 eight digital telephones with OCA, 64
for OCA/DSS.
Slot 12: Code 11 for TCOU (four loop lines) or 77 for TBSU (two ISDN BRI circuits (4
channels NT or TE)).
Slot 13: Code 31, four KSTU3 ports.
Slot 14: This is not supported in the UK.

Expansion KSU PCBs

A DK40 Expansion KSU from the factory does not come with any PCBs installed.
1-2 for a list of PCBs supported by the DK40 Expansion KSU and
Universal Slot PCBs
that PCBs which support electronic or digital telephones be installed into slots 15 and 16
because slots 17 and 18 cannot support Off-hook Call Announce (OCA).

PCB Hardware/Software Options

PCBs can be configured for a variety of hardware and software options. Hardware options are
defined as either internal (generally related to optional PCB subassemblies) or external
(related to connection of peripheral equipment, such as background music, voice mail, etc.).
Hardware and software options for each PCB are identified in the individual PCB installation
procedures in this chapter.
2-22
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
Provides
for detailed descriptions/installation instructions.) Toshiba recommends
Printed Circuit Board (PCB) Installation
Installs On
TMAU
motherboard
TMAU
motherboard
K5RCU
Strata DK40 I&M Manual Spring 1999
Comments
Only one TCOU or TBSU
can be installed on the
motherboard.
Only one KSTU3 and
K5RCU can be installed on
the motherboard.
Only one KKYS, RKYS2 or
RKYS3 can be installed on
the K5RCU.
Page 2-8, then install the
(See Table
Chapter 3 – DK40