Table 3-4 Pious Controls, Indicators, And Connectors - Toshiba Strata DK40 Installation & Maintenance Manual

PIOU, PIOUS Option Interface Units
Table 3-4 PIOUS Controls, Indicators, and Connectors
Control/Indicator/Connector
SMDR/TTY interface connector J3
IMDU connector P1
IMDU connector P2
IMDU connector P3
M/B make/break jumper W1
M/B make/break jumper W2
Alarm sensor N.O./N.C. W3
CCITT/BELL jumper W4
SMDR baud rate switch SW1
TTY baud rate switch SW2
Modem/TTY switch SW3
P15
*Top modular is TTY and bottom modular is SMDR.
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
Type of Component
Dual modular connector (top
modular is TTY, bottom is
SMDR)
10-pin connector
9-pin connector
3-pin connector
3-terminal jumper plug
2-position slide switch
2-position locking push-button
switch
2-position slide switch
3-pin jumper
DK40 Universal Slot PCBs
Description
Interface connector for SMDR
printer/call accounting device and
maintenance terminal/modem.*
Interface connector for remote
maintenance modem piggy-back
module.
External Page/Door Lock Control
Relay Make or Break jumper plug.
Night/Hold relay make or break
jumper plug.
Alarm sensor normally open or
normally closed jumper plug.
IMDU or external modem operating
specification jumper. For UK
operation ensure it is set for CCITT.
Selects baud rate (300 or 1200 bps)
for SMDR printer or call accounting
device.
Selects baud rate (300 or 1200 bps)
for Remote Maintenance Modem
piggy-back module (IMDU) or
external TTY jack.
Enables PIOUS for operation with
IMDU modem or TTY jack.
A or Mu law switch. Must be set for A
law operation in th UK.
3-15