Toshiba Strata DK40 Installation & Maintenance Manual page 300

Computer Telephony Integration
lineGetLineDevStatus
This operation queries the specified open line device for its current status. If successful it
returns the current status of the specified open line device using a data structure
LineDevStatus.
Field Name
dwNumOpens
dwOpenMediaModes
dwNumActiveCalls
dwNumOnHoldCalls
dwNumOnHoldPendCalls
dwLineFeatures
dwNumCallCompletions
dwRingMode
dwSignalLevel
dwBatteryLevel
dwRoamMode
dwDevStatusFlags
dwTerminalModesSize
dwTerminalModesOffset
dwDevSpecificSize
dwDevSpecificOffset
lineGetAddressID
This function is used to map a phone number assigned to a line device back to is
dwAddressID in the range of 0 to the number of addresses minus 1 returned in the line's
device capabilities. LineMakeCall allows the application to make a call by specifying a line
handle and address on the line. The address can be specified either as dwAddressID, as a
phone number, or as a device specific name or identifier.
8-20
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
The number of instances this application opened, normally 1.
LINEMEDIAMODE_INTERACTIVEVOICE
The number of calls ringing and/or connected
The number of calls that are on hold.
The number of calls pending in the ONHOLDPENDCONF or the
ONHOLDPENDTRANSFER states.
LINEFEATURE_MAKECALL if no active call exists, otherwise 0.
Always 0.
Not supported by Toshiba DKT TSPI
Not supported by Toshiba DKT TSPI
LINEROAMMODE_UNAVAIL
The current status of the device.
Not supported by Toshiba DKT TSPI
Not supported by Toshiba DKT TSPI
Receiving Information
Setting
Strata DK40 I&M Manual Spring 1999