Peripherals - Toshiba Strata DK40 Installation & Maintenance Manual

Expansion KSU

Peripherals

An Expansion KSU can support PIOU, PIOUS and PEPU PCBs
options).
PIOU or PIOUS
The PIOU/PIOUS provides one dedicated RS-232 port for Station Message Detail Recording
(SMDR) connection to a call accounting device and one of the following:
a TTY/RS-232 port which can be connected to a customer-provided external modem
for remote maintenance, or to a local PC with DK Admin or for ACD MIS.
connectors for an internal modem (IMDU) for remote maintenance and administration.
DK40 Interface PCB Options
Table 1-3
Zone page interface (unamplified, 4 zones)
Unamplified page output (single zone, 600 ohms, duplex)
Night transfer or Music-on-hold control relay
Door lock or external amplifier control relay
IMDU remote maintenance modem subassembly (disables TTY output
when they are piggy-backed onto the PIOU or PIOUS cards)
Remote Maintenance using customer-provided external modem and/or
DK Admin PC (requires TTY output port)
SMDR output (RS-232/6-wire modular connector)
Alarm sensor
1
Amplified page output (single zone, 3 watts) on the PIOU, PEPU is not available on the DK40.
2
These functions are standard (built-in) to the DK40 Base KSU.
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
1
Interface Options
DK40 Configuration
(see Table 1-3 for a list of
1-5