Electronic Telephone Circuit Connections; Standard Telephone Circuit Options - Toshiba Strata DK40 Installation & Maintenance Manual

DK40 Configuration

Electronic Telephone Circuit Connections

There are no electronic telephone circuits in the Base KSU, and none can be added to it.
However, the PEKU PCB, which has eight electronic telephone circuits, can be installed in
the Expansion KSU.
The following devices can be connected to electronic telephone circuits
Electronic Telephone Circuits
Table 1-9
Electronic Device
Electronic telephones
(6500-series)
Electronic Direct Station Selection
Console (HDSS)

Standard Telephone Circuit Options

In addition to supporting standard telephones, each of the standard telephone circuits can
support any one of a number of single-wire-pair devices, including voice mail/Auto
Attendant devices and modems
Standard Telephone Circuits
Table 1-10
Standard Telephone Circuits
Number of Standard Telephone Circuits
1-10
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
No. of
Circuits
Required
Each electronic telephone circuit can support an electronic
1
telephone.
The system supports only one HDSS console. The
2 console must be connected to both circuits 7 and 8 on the
PEKU.
(see Table 1-10).
KSTU3
(Base KSU)
4
Telephone Circuit (Port) Types
(see Table
Comments
RSTU2 PSTU
(Exp. KSU) (Exp. KSU)
8
Strata DK40 I&M Manual Spring 1999
1-9).
8