Non-Built-In Auto Attendant; Multiple Piou, Pious Installation - Toshiba Strata DK40 Installation & Maintenance Manual

Multiple PIOU, PIOUS Installation

Non-built-in Auto Attendant

Alternatives to using the Strata DK40 built-in AA feature, are voice mail systems, such as
Toshiba Stratagy or Stratagy DK, with an AA feature and non-voice mail AA as a stand-alone
device.
Non-built-in Auto Attendant Programming
The Auto Attendant programs described in
6-52 do not apply to the Non-integrated AA feature sources, but Strata DK40 Programs 03,
04, *09, 10-1, 13, 16, 31, 33, 36, 37, 39, 71-75 and 81~89 should be considered for proper
operation.
Non-built-in Auto Attendant Installation
Non-integrated AA sources, such as voice mail devices and stand-alone units, connect to
standard telephone circuits (ports).
more information.
Multiple PIOU, PIOUS Installation
Up to three PIOU or PIOUS PCBs can be installed in a system to simultaneously provide:
maintenance terminal (or modem) interface, Management Information System (MIS) for
ACD interface, and RS-232 SMDR interface.
Each of these interfaces are provided by the modular jacks on a separate PIOU, PIOUS,
(Figure
PIOUS Paging, SMDR, relay control, alarm sensor, and door lock functions will be active
only on the PIOU or PIOUS PCB which is assigned the lowest Program 03 code (41 or 42).
Strata DK40 I&M Manual Spring 1999
Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.
6-29). Interface assignments are made in Program 03 (Code 41 - 42). PIOU and
"Built-in Auto Attendant Programming" on Page
See Chapter 4 – DK40 Universal Slot PCB Wiring
Peripheral Installation
for
6-59