Saeco Card Assembly Kit - Saeco D.A. COMBISNACK Use And Maintenance

9 - SAECO CARD ASSEMBLY
KIT
Assembly kit (fig. 60)
a. 1 adhesive sheet for drilling
b. 1 guard for universal module
c. 1 flat cable
d. 4 screws and 4 spacers for card
e. 1 Saeco card external antenna
d
Important
To use the Saeco card, the machine must be equipped with a
Time keeper.
Important
If the universal module to be mounted has a 1432.0xx or
1471.0xx code, it will be necessary to use a payment system
feeder kit.
Installation
- Place the adhesive sheet (ref. a, fig. 60) on the lower tile (fig.
61). Drill according to the diagram on sheet using a 3 dia.
point for the two small holes and a 10 dia. point for the other
hole.
a
b
c
f
e
fig. 60
fig. 61
- Open the upper front door.
- Loosen the guard fastening screws and remove it (fig. 62).
- Remove the two screws (fig. 63) of the external antenna; they
will be subsequently used to fasten the antenna to the tile.
- Fasten the antenna on the tile (fig. 64) by sliding the cable
through the 3 dia. hole.
English
fig. 62
fig. 63
fi fig. fig. 64 g. 6 64 6 64 4 4
Espr Es Es Es Es Es Es Es Es Es pr pr pr pr pr pr pres es es es es es esso es es so so so so so so so so Italia PTY PT PTY PT PTY Y Y
www.espressoitalia.com.au
Freecall 1300 660 976
LT LT LT LT LT LTD
17 17 17