Saeco D.A. COMBISNACK Use And Maintenance page 11

Access the machine programming menu and set "YES" in the
"TANK" menu (fig. 34) to enable the display reading of the
discharge fluid maximum level.
In order to properly carry out this operation, disable the safety
device and press key 1 (fig. 33) to access the programming
menu.
If no password has been assigned you enter the programming
menu directly.
Important
If vending machine was assigned a password to enable the
programming menu, "PASSWORD 0000" will appear on
display with a flashing cursor on the first digit.
Now digit the password using UP and DOWN keys. Confirm
the entered digit by means of ENTER key.
To exit the programming menu and return to the normal operation
of the vending machine:
- press key 1 again;
- remove the key from the safety switch to turn off the vending
machine;
- close the door and wait for the self-configuration process to
end.
SISTEM MANAGEMENT VM CODE
MIN. TEMPERATURE
MAX. TEMPERATURE
COLD TEMPERATURE
COMPRESSOR
DRAINAGE TANK
When the tank maximum level is reached, the display will
read "HOT BEVERAGES NOT AVAILABLE" (ERROR 09 code).
In this condition, the V.M. cannot brew hot beverages. It is
therefore necessary to empty the tank. After emptying the
tank, the error message will automatically disappear at the
machine switching on.
fig. 33
0000
STOP
098
Entries selectable
only with complete
108
menus
6
YES
DRAINAGE TANK
NO
>Y< N
Important
fig. 34
Italia PTY LTD
www.espressoitalia.com.au
Freecall 1300 660 976
English
1
11 11 11