Sugar Coil Kit - Saeco D.A. COMBISNACK Use And Maintenance

8 - SUGAR COIL KIT

This kit allows the sugar door opening only when required, since
an electromagnet controls it. This prevents any sugar grain from
accidentally falling when the "without sugar" option has been
selected.
Assembly kit (fig. 50)
a. 1 two-pin connector
b. 1 connecting rod
c. 2 M3x6 screws, 1 M3x8 screw and 1 M3 nut
d. 1 relay electromagnet
e. 1 spring
f. 1 sticker
c
d
a
b
Installation
- Open the upper front door.
- Remove the sugar-dispensing channel by opening the screw
(ref. g, fig. 51).
e
f
fig. 50
g
fig. 51
- Disassemble the sugar-dispensing channel (Fig. 52).
- Install the connecting rod (ref. b, fig. 50) on the electromagnet
piston (ref. d, fig. 50) by means of the spring (ref. e, fig. 50)
to obtain the unit shown in fig. 53.
- Apply the sticker (ref. f, fig. 50) to the electromagnet (fig. 54)
in order to seal the hole located on the machine housing.
fig. 53
- Assemble this unit (see fig. 54) on the sugar channel (fig. 55)
by means of two M3x6 screws (ref. c, fig. 50).
English
fig. 52
fig. 54
fig. 55
Espresso Italia PTY LTD
www.espressoitalia.com.au
Freecall 1300 660 976
15 15 15