Installation
5.2
SINAMICS DCM - Installing the Firing Unit Trigger Board
When using the SIMOREG CCP with SINAMICS DCM connected in parallel, each SINAMICS
DCM must be equipped with a supplementary module "fast pulse cancellation interface" (Firing
Unit Trigger Board) (Order No.: 6RY1803-0CP00). See chapter 6.3.2.
CAUTION
Please observe the information provided on "Electrostatic sensitive devices (ESD)" in Chapter 1.
WARNING
Always carry out the work with the SINAMICS DCM in a no-voltage condition!
24
ENGLISH
SIMOREG DC-MASTER Converter Commutation Protector
12.2010
Siemens AG
6RX1700-0DD74
Operating Instructions