Siemens SIMOREG DC-MASTER Operating Instructions Manual page 28

Connecting
The following basic rule applies
The sum of the lengths, formed from l
the diagram above (2*l= l
possible or as required (e.g. using busbars) and use motor-side connecting cables with the
required length.
Example
The minimum required cable length l_min is 3 m.
- Use 3m lengths each for 1U1, 1V1, 1W1, 1C1, 1D1.
- Or: e.g. use 1m lengths each for 1U1, 1V1, 1W1 and 5 m lengths each for 1C1, 1D1
28
ENGLISH
and l
UVW CD
+ l ). You can e.g. keep the line-side connecting cables as short as
UVW CD
SIMOREG DC-MASTER Converter Commutation Protector
must have twice the value of l (2*l) according to
12.2010
Siemens AG 6RX1700-0DD74
Operating Instructions