Using The Menu Select Mode; Entering The Menu Select Mode - Oki MICROLINE 591Elite User Manual

Using the Menu Select Mode

The Menu Select mode gives you fingertip control over some of your printer's most
important features. Menu selections are chosen while in the Menu Select mode and
retained in the printer's non-volatile memory. In effect your settings become the
default settings, although they can be changed through software commands, through
the control panel or through resetting the menu.
Note: You can override features set on the menu using either the control
panel or commands sent from your computer. However, when you turn off
the printer, features set by those methods will be cancelled. Features set on
the menu will stay in effect, even when the printer is unplugged.

Entering the Menu Select Mode

To enter MENU mode, depress SEL/MENU and SHIFT buttons or depress SEL/
MENU during power up.
Upon entering Menu mode, press the GROUP button to print a group of menu items,
ITEM button to print a single line menu item or the SET button to assign a different
value.
See Key functions for description of operation within the Menu mode.
To exit MENU mode, press the SEL/MENU button together with the SHIFT button.
If conflicting features/functions are set in Menu mode, the printer will treat these
features/functions according to its priority table.
The TOF position is not affected by Menu mode if paper length is not changed. If paper
length changes, set the Menu end position at TOF.
Depressing SEL/MENU + LF or FF/LOAD + TEAR buttons while powering up will
reset the menu back to its factory defaults, (see Factory Settings for further details).
If the Operator Panel is set to Limited Operation, press the SEL/MENU button during
power up in order to enter MENU.
2 – 7