Oki MICROLINE 591Elite User Manual page 41

Setting
1
2
3
4
5
6
7
8
9
Wait Time: Is the amount of time delay before the paper is automatically fed, using
the top feed.
Page Length Control: The printer can detect the page length by paper-end sensors if
the Actual Page Length is chosen. Otherwise, the default value is set in the menu.
Print Registration: Use this option with bidirectional bit image graphics to improve
registration. Although 0 is generally the best selection, choosing another value may
compensate for registration problems with some graphics software packages.
Operator Panel Functions: Full Operation is the normal setting. Choose Limited
Operation to deactivate the PRINT QUALITY and CHARACTER PITCH buttons on
the control panel. Then you can control these features only through your software. This
can be useful when several people are using the printer and you do not want its settings
changed.
Reset Inhibit: Choose YES if your software package or computer sends an initialization
command at the start of each job. This initialization command will reset any features
that you may have set to the menu default.
Print Suppress Effective: Select YES when you want the print suppress commands
in each of the emulations to be active. The print suppress commands are ignored when
this option is set to NO.
2 – 16
Multi paper Interleaf
-
1P
2P
3P
4P
5P
6P
6P
-
Max. paper
Thickness
- -
1P 0.10
2P 0.16
- 0.20
3P 0.265
4P 0.33
5P 0.40
5P 0.40
- -
Envelope
-
-
-
-
-
o
o
o
o