Justification - Oki MICROLINE 591Elite User Manual

IBM
If you just want to change one of the margins, give a value of 0 for the margin you do
not want to change. The default left margin for the two IBM emulations is 1; for default
right margins, see the table below.
Pitch
10 CPI
12 CPI/proportional
15 CPI
17.1 CPI
20 CPI

Justification

Justification
n = 0 : Left; n = 1: Centre; n = 2: Right; n = 3: Full (left and right)
Epson
This command lets you specify the alignment of text on the page: along the left or right
margin, centred between the margins, or along both the left and right margins. When
you are using centre, right or full justification, the backspace character (ASCII BS,
decimal 8) will not function. If you are using full justification, use a carriage return only
at the end of a paragraph, not at the end of each line.
ML590
Decimal Hex
27 97 n 1B 61 n
ML591
80 136
96 163
120 204
137 233
160 255
ASCII
ESC a n
Comp
E
3 – 25