Printable Area - Oki MICROLINE 591Elite User Manual

Printable Area

The default top margin when using single sheets is 0.35 inch (8.89mm). However, the
top of form position can be adjusted by micro feed in steps of
position of 0.02 inches (0.5mm) from the top edge of the paper.
0.02 inch
minimum
(0.5mm)
0.02 inch
minimum
(0.5mm)
The bottom margin defaults to 0.5 inches (12.7mm) with Bottom Margin Valid set in
the menu. If this menu item is set to Invalid, the bottom margin will be controlled by
the Page Length setting, and will allow printing to a minimum distance of 0.02 inches
(0.5mm) from the bottom edge of the page.
Note: Care should be exercised to ensure that the correct page length
setting is selected when the Bottom Margin Invalid option is chosen, as
overprinting on to the platen roller could occur, damaging both the
printhead and the roller.
1 – 10
Additional Area
Additional Area
0.16
inch
(4.1mm)
1
¦ inches to a minimum
180
0.35 inch top
margin default
(8.89mm)
Printable area
0.5 inch bottom
margin default
(12.7mm)
0.12
inch
(3.0mm)