Clear Buffer; Delete One Character; Automatic Line Feed - Oki MICROLINE 591Elite User Manual

Many software packages send the reset command to initialise the printer before or after
printing. This is done to make sure that settings from a previous print job do not
accidentally carry over into the next one. However, this could interfere with settings
you have made on the control panel or through control codes.
If your software lets you add or modify initialisation strings (also called setup strings),
you can eliminate reset commands you do not want, or add them where you want to
be sure the printer is set to its defaults (the menu settings). Check your software manual
for details on modifying initialisation strings.

Clear buffer

Clear buffer
This command clears all the data from the print buffer, but does not reset printing
features that have been set using control codes.

Delete one character

Delete one character
Epson
This command deletes the last character sent to the printer. It will not delete graphics
data, and only deletes one space of a horizontal tab skip.

Automatic line feed

Automatic line feed
n = 1: Activate auto line feed n = 0: Deactivate auto line feed
IBM
When you activate automatic line feed, the printer will add a line feed to each carriage
return code it receives. You can also control this feature through the menu.
3 – 38
Decimal Hex
24 18
Decimal Hex
127 7F
Decimal Hex
27 53 n 1B 35 n
ASCII Comp
CAN E P A
ASCII Comp
DEL E
ASCII Comp
ESC 5 n P A