Connecting to Your Computer
Before you can use your printer, you need to attach it to your computer using an
interface cable.
Notes: Interface cables are not supplied with the printer.
Do not connect serial and parallel cables at the same time.
AC mains cable
1.
Make sure both your computer and your printer are switched OFF.
2.
Attach the AC mains cable to the socket in the rear of the printer, and plug it into
an earthed power source.
Note: Do not use an unearthed adapter with your printer. The printer must
be connected to an earthed power supply.
3.
Plug the printer end of your interface cable into the connector at the rear of the
printer.
4.
Connect the other end of your interface cable to the printer port on your computer.
Interface cable
1 – 3