Table of Contents
Advertisement
Hard drive
Description
500 GB 5400 rpm 7 mm/ 9.5 mm
750 GB 5400 rpm, 9.5 mm
1 TB, 5400 rpm, 9.5 mm
Hard Drive Hardware Kit
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the base enclosure and top cover (see
7.
Remove the USB connector cable (see
Remove the primary hard drive:
▲
Disconnect the hard drive cable from the system board (1), and then tilt the hard drive (2) and lift to
remove it (3).
If it is necessary to disassemble the hard drive:
▲
Remove the hard drive cable (1), and then remove the hard drive bracket (2).
50
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
30).
Optical drive on page
Base enclosure on page
USB board on page
31).
34).
49).
Spare part number
778186-005
778190-005
778192-005
773501-001
Advertisement
Table of Contents
