Table of Contents
Advertisement
9.
If it is necessary to remove the display panel cable or access the webcamera and microphone, follow
these steps. With the display bezel upside down, disconnect the webcamera/microphone connectors (1)
and from the routing channel built into the back cover.
Carefully release the cable from the channel guides, the guides in the display hinge, and remove the
display panel cable (2). Lift the cable to remove it.
10.
On select models, removing the panel also requires disengaging the panel from the back cover latch. To
disconnect the display panel, carefully rotate the display panel (1) to open it. Push upward on the
connection latch (2)panel and then disengage the panel from the back cover (3).
42
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Advertisement
Table of Contents
