Table of Contents
Advertisement
Reverse these procedures to reassemble and install the hard drive.
System board
NOTE:
The system board spare part kit includes replacement thermal material.
Description
System board (includes replacement thermal materials):
All system boards use the following part numbers:
xxxxxx-001: Without the Windows operating system
xxxxxx-501: Windows 8.1 Standard
AMD A10-7300 (1.9 GHz, up to 3.2, GHz, 2 MB L2), quad core 20 W, Max DDR3L-1600
AMD A8-7050 (2.2 GHz up to 3.0 GHz, 2 MB L2), dual core 15 W, Max DDR3L-1600
AMD A6-6310 (1.8 GHz up to 2.4 GHz, 2 MB L2), quad core 15 W, 1600 MHz DDR3L
AMD E1-6010 (1.35 GHz up to 1 MB L2), dual core 10 W, Max DDR3L-1333
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the top cover from the base enclosure (see
7.
Remove the WLAN module (see
Remove the system board:
1.
Remove the following cables if you have not already done so:
Battery on page
30),
Optical drive on page
WLAN module on page
31).
Base enclosure on page
44).
Component replacement procedures
Spare part number
809985-xx1
809986-xx1
809987-xx1
809988-xx1
34).
51
Advertisement
Table of Contents
