Technics SX-KN7000 Operating Instructions Manual page 84

Part IV
CYCLE PLAY
You can have specified measures played back
repeatedly.
1.
On the SEQUENCER PLAY display, specify
"PLAY" for track numbers you wish to have
played back.
2.
Press the CYCLE button.
• The display looks similar to the following.
3.
Use the START MEASURE
to specify the beginning measure number.
4.
Use the END MEASURE
specify the ending measure number.
MEDLEY
Multiple recorded songs can be played back in a medley.
1.
On the SEQUENCER PLAY display, press the
MEDLEY button.
• The display looks similar to the following.
2.
Specify the order of songs in the medley.
84
QQTG0671
∧ ∨
and buttons
∧ ∨
and buttons to
• The measure in which the END command has
been stored can also be specified.
START
1 2
CYCLE END MEASURE: 4
5.
Press the START/STOP button.
• Cycle playback of the specified measures
begins.
• Normally the rhythm pattern is not played
back.
6.
To stop cycle playback, press the START/
STOP button again.
• During playback stop, if the SEQUENCER
RESET (FILL IN 1) button is pressed, the
SEQUENCER returns to the measure number
specified in step 3. If the SEQUENCER
RESET button is
SEQUENCER returns to measure 1.
• If you press the CYCLE: ON button to turn it
OFF, cycle playback is not possible.
• To return to the SEQUENCER PLAY display,
press the EXIT button.
• Cycle playback can also be specified on the
SEQUENCER PLAY display whenever the
CYCLE: ON indication is shown.
• If ALL is pressed, all the files are selected,
and the songs are played back in order in a
medley. If ALL is pressed again, the files are
deselected.
• You can use the buttons below the display to
select a song to add to the song list, then press
the ADD button to add it to the list. Repeat
these steps to create your own list of songs
to have played back. A M01, M02 etc. next to
the file name indicates its order in the list.
• You can delete a marked file from the medley
song list by selecting it and pressing the ADD
button.
• Use the LOOP button to specify ON or OFF
for repeat playback of the medley.
3.
Press the START button.
• During medley playback, you can use the SKIP
button to skip to the next song.
Sequencer
END
3 4
pressed again, the