Technics SX-KN7000 Operating Instructions Manual page 204

No.
Special tracks such as CHORD (APC),
RHY and CTL exist in the song from
55 which you
incompatible with the destination song
because it is in the GM mode.
AUTO PUNCH recording has been
unsuccessful
56
operation was interrupted before the
PUNCH OUT measure was reached.
The song that you have tried to load
exceeds this
58
memory and cannot be loaded. The
selected song memory has been cleared.
The computer connection is not active
because the computer port switch is set
62 to MIDI. Please turn the power off, set
the switch to the desired setting and turn
the power back on.
This Bitmap is in the wrong format for
the KN and cannot be loaded. See the
63
Owners Manual for more details.
Please select the Panel Memory that you
64
want to name.
It is not possible to use the CHORD
FINDER in this mode. Please select
65
CHORD FINDER from HOME page or
CHORD STEP RECORD page.
SOLO pads are special pads which
include Chord information. Pleases use
66
SOLO pads when the rhythm and
accompaniment is playing.
There are no APC or CHORD tracks.
Select and APC track or CHORD track,
67
and try again.
It is not possible to record directly into
the SOLO
68
SEQUENCER and Copy the melody and
chord information into a SOLO pad.
69 It is not possible to delete all measures.
It is not possible to insert over 16
70
measures in a PATTERN.
It is not possible to set the start measure
71
to the measures you set to copy.
204
QQTG0671
Contents
are copying and are
because SEQUENCER
instrument's available
pads. Record on the