Technics SX-KN7000 Operating Instructions Manual page 132

Part VI
<SAVE OPTION>
Specify the kind of data you wish to save to the
disk. To maximize effective use of disk memory
or to minimize the save time, select only the type
of data you wish to save.
1.
Use the PAGE buttons to access the 2/3 SAVE
OPTION display.
• The display looks similar to the following.
2.
Use the buttons below the display to specify
the types of data you wish to save (YES/NO).
• For PANEL MEMORY, select from NO/3
BANK/ALL.
If you save data with 3 BANK selected, only
banks A, B and C are saved.
• Press the PERFORM button to select all the
performance data, or press the BACKUP but-
ton to select all the back up data at once.
• If the ALL OFF button is pressed, all the set-
tings change to NO.
3.
Press the SAVE button.
• The SAVE operation begins.
132
QQTG0671
<SEQUENCER SONG SAVE>
You can specify a
SEQUENCER to save to the disk.
1.
Use the PAGE buttons to access the 3/3
SEQUENCER SONG SAVE display.
• The display looks similar to the following.
2.
Use the buttons below the display to select
the song number you wish to save.
3.
Press the SAVE button.
• The SAVE operation begins.
If there is no point assignment in the
SEQUENCER song you are trying to save
even though your original images have been
loaded, when the SAVE button is pressed, a
display appears asking whether or not the
image data is to be saved.
Disk Drive
single song in the