Technics SX-KN7000 Operating Instructions Manual page 156

Part VIII
<PAGE 4>
FILTER RESONANCE:
Use the RESONANCE
the amount of resonance (0 to 127).
BRIGHTNESS:
Use the BRIGHTNESS
the brightness of the sound (0 to 127).
ATTACK TIME:
∧
Use the ATTACK and
attack time (0 to 127).
DECAY TIME:
∧
Use the DECAY and
decay time (0 to 127).
<PAGE 5>
MONO/POLY MODE:
Use the MONO/POLY MODE
to select the output mode.
PORTAMENTO:
Use the PORTAMENTO ON/OFF buttons to
enable or disable the portamento function. (Por-
tamento is a continuous gliding movement from
one tone to another.)
∧ ∨
Use the and buttons to specify the porta-
mento time.
• PORTAMENTO does not function for the
POLY MODE.
MODULATION SENSITIVITY:
Use the MODULATION SENS
to adjust the sensitivity of the MODULATION
wheel.
∧
• Use the MSB
and
crements) and the LSB
adjust the setting.
156
QQTG0671
∧ ∨
and buttons to adjust
∧ ∨
and buttons to adjust
∨
buttons to specify the
∨
buttons to specify the
∧ ∨
and buttons
∧ ∨
and buttons
∨
buttons (half-tone in-
∧ ∨
and buttons to
RELEASE TIME:
∧
Use the RELEASE and
the release time (0 to 127).
VIBRATO RATE:
∧ ∨
Use the RATE and
vibrato speed (0 to 127).
VIBRATO DEPTH:
∧ ∨
Use the DEPTH and
vibrato depth (0 to 127).
VIBRATO DELAY:
∧ ∨
Use the DELAY and
time interval from when the keys are played until
the vibrato starts (0 to 127).
• The center value is 64 (±0).
Sound
∨
buttons to specify
buttons to specify the
buttons to specify the
buttons to specify the