Technics SX-KN7000 Operating Instructions Manual page 111

Part V
• To assign a name to each VARIATION, press
the VARIATION button and select a number.
3.
On the RECORD MEMORY display, press the
OK button.
• The display looks similar to the following.
4.
Press the CLEAR THE ENTIRE PATTERN
button.
• The display looks similar to the following.
5.
Press the YES button.
• All the data for the selected pattern is erased.
∧
6.
Use the MEASURE
the number of measures in your new rhythm
pattern (1 to 16).
7
Use the TIME SIGNATURE
to specify the meter of the pattern (1/4 to 8/4).
• When the settings for the MEASURE and
TIME SIGNATURE of the INTRO or ENDING
patterns are changed, the Maj and Min settings
change at the same time.
8.
Press the OK button.
∨
and buttons to specify
∧ ∨
and buttons
KEY SETTING
Set the key and chord in which you wish the re-
corded pattern to be played. If the recorded per-
formance is played in a key or chord different
from this setting, the automatic accompaniment
will not be able to distinguish the correct chord.
1.
On the RECORDING display press the KEY
SETTING button.
• The display looks similar to the following.
∧ ∨
2.
Use the KEY and
∧
Use the CHORD and
chord type (Maj/Min).
3.
When you have finished making the settings,
press the EXIT button.
Composer
buttons to set the key.
∨
buttons to set the
111
QQTG0671